Door Archives - Seatbelt Cover

January 29, 2020

GOOACC Nylon Bumper Fastener Rivet Clips Car Door Clip Panel Audio Video Dashboard Dismantle Kits Installer Pry Tool (40PCS Fastener Rivet Clips)

40PCS Nylon Bumper Fastener Rivet Clips 8mm

Product Features

UNIVERSAL FIT: These universal push-type plastic clips will fit on most of auto parts with 8mm hole, hold your parts very tightly
STURDY AND DURABLE: Made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use
MULTIPLE USE: Widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers
PRODUCT SIZE: Head Diameter: 20mm/ 0.8 inches; Stem Length: 22.8mm/0.9 inches; Fits Into: 8mm /0.3 inches hole
PACKAGE INCLUDE: 40PCS Fastener Rivet Clips

Click Here For More Information

August 21, 2019

Car Door Logo Light, 2 Pack LED Car Projector Logo Spirit Shadow Light Door Lighting Welcome Lamp Wireless Laser Projector Logo Light, Compatible for Chevrole

Specifications: Brand new and high quality
Easily to install it yourself with the 3M adhesive sticker, no more troubles of making holes.
Avoid to get off car on bad road, such as water marsh land.
Auto light up with the door opening.
Environmental, high power, high efficient, energy saving, no pollution, no noise, no electronic interface.
Lighting steady and constant, clear and soft.
Size:62*67*14mm
Power Supply: 3x AAA battery

Install Instruction:
1. Install instruction about the batteries: Put 3 pcs AAA(1.5V) batteries in the battery case and install them according to the positive & negative as marked in the case. Then close the batteries case.
2. Install instruction of the shadow light: Stick the Magnet on the bottom of the car frame. Stick the car light on the car door. The distance between the Magnet & Car light is about 10mm. When you close the car door, the Magnet is at the under face of the sensor on the car logo light.
3. Automatic Control & Manual Control: When you open the door, the logo will be shown on the ground, and it will turn off automatically after 2 minutes. If you want the light on/off, just need to press the button on the head of the light.
One set includes 2 pcs, suggest you buy 2 sets for 4 doors of your car! Package includes:
2x Ghost Shadow Car Door LED Welcome Laser Projector Decoration Logo Light

Product Features

COMPATIBLE TO CHEVY CAMARO CRUZE SPARK TAHOE IMPALA SUBURDAN TRAX MALIBU COLORADO TRAVERSE EQUINOX SILVERADO AND MORE* Wireless door welcome VIP light requires very low energy while offers high definition and bright lighting. As long as stick on flat car door near to step bar.
Bright Projection – Using high brightness Laser light, visual effect more dynamic and more stylish, low power consumption and high definition logo.
Automatic Magnetic Induction Control Switch – When the distance between the magnet and the projection lamp is 1-2cm, the lamp will turn on automatically.
Easy To Install – No need drilling and rewiring, replace no tools required and do not need bore a hole. Just stick the light lamp on the door panel and stick the magnet on the bottom of the car frame. No harm to car.
This product is wireless especially designed for car modification enthusiasts, it will not destroy the original car appearance bring more driving fun to drivers. Courtesy door light make your car artistic moreover the atmosphere.

Click Here For More Information

July 27, 2019

Bearfire 2 Pcs Wireless Car Door Led Welcome Laser Projector Logo Light Ghost Shadow Light Lamp Logos (ford)

Brand new and high quality
Easily to install it yourself with the 3M adhesive sticker, no more troubles
of making holes.
Avoid to get off car on bad road, such as water marsh land.
Auto light up with the door opening.
Environmental, high power, high efficient, energy saving, no pollution, no
noise, no electronic interface.
Lighting steady and constant, clear and soft.
Size:62*67*14mm
Power Supply: 3x AAA battery

Install Instruction:
1. Install instruction about the batteries: Put 3 pcs AAA(1.5V) batteries in
the battery case and install them according to the positive & negative as
marked in the case. Then close the batteries case.
2. Install instruction of the shadow light: Stick the Magnet on the bottom of
the car frame. Stick the car light on the car door. The distance between
the Magnet & Car light is about 10mm. When you close the car door, the
Magnet is at the under face of the sensor on the car logo light.
3. Automatic Control & Manual Control: When you open the door, the logo
will be shown on the ground, and it will turn off automatically after 2
minutes. If you want the light on/off, just need to press the button on the
head of the light.
One set includes 2 pcs, suggest you buy 2 sets for 4 doors of your car!
Package includes:
2x Ghost Shadow Car Door LED Welcome Laser Projector Decoration
Logo Light

Product Features

100% Brand New Door Laser wireless sensor Light Lamps, Free replacement for the logo film slide,Powered by 3 Pcs AA batteries(Package Not Included)
This product is wireless especially designed for auto modification fancier and it will not destroy the original car appearance bring more driving fun to drivers.
The dazzle logo light and the signal light will display on the ground when you open the car door and it will be turn off when you close the door.
It can be installed in both left & right door. Courtesy door light make your car artistic moreover the atmosphere.
Easy installation. No need drill hole. Just stick the light lamp on the door panel and stick the magnet on the bottom of the car frame. No harm to car.

Click Here For More Information

March 14, 2019

Soondar® 2 x Wireless No Drill Type Led Laser Door Shadow Light Welcome Projector Light Led Car Door Logo Ford Ghost Shadow Emblems (Ford) – No Drilling Required

Package Includes:

2 x Soondar Wireless Car Projection LED Projector Door Shadow Light

Product Features

100% Brand New Door Laser wireless sensor Light Lamps, Free replacement for the logo film slide,Powered by 3 Pcs AAA batteries(Package Not Included)
This product is wireless especially designed for auto modification fancier and it will not destroy the original car appearance bring more driving fun to drivers.
The dazzle logo light and the signal light will display on the ground when you open the car door and it will be turn off when you close the door.
It can be installed in both left & right door. Courtesy door light make your car artistic moreover the atmosphere.
Not compatible with FORD F150, 2018 Ford Explorer. Easy installation. No need drill hole. Just stick the light lamp on the door panel and stick the magnet on the bottom of the car frame. No harm to car.

Click Here For More Information

December 27, 2018

Bearfire 2 Pcs Wireless Car Door Led Welcome Laser Projector Logo Light Ghost Shadow Light Lamp Logos for chevrolet Accessories

Install Instruction:
1. Install instruction about the batteries: Put 3 pcs AAA(1.5V) batteries in
the battery case and install them according to the positive & negative as
marked in the case. Then close the batteries case.
2. Install instruction of the shadow light: Stick the Magnet on the bottom of
the car frame. Stick the car light on the car door. The distance between
the Magnet & Car light is about 10mm. When you close the car door, the
Magnet is at the under face of the sensor on the car logo light.
3. Automatic Control & Manual Control: When you open the door, the logo
will be shown on the ground, and it will turn off automatically after 2
minutes. If you want the light on/off, just need to press the button on the
head of the light.
One set includes 2 pcs, suggest you buy 2 sets for 4 doors of your car!
Package includes:
2x Ghost Shadow Car Door LED Welcome Laser Projector Decoration
Logo Light

Product Features

100% Brand New Door Laser wireless sensor Light Lamps, Free replacement for the logo film slide,Powered by 3 Pcs AA batteries(Package Not Included)
This product is wireless especially designed for auto modification fancier and it will not destroy the original car appearance bring more driving fun to drivers.
The dazzle logo light and the signal light will display on the ground when you open the car door and it will be turn off when you close the door.
It can be installed in both left & right door. Courtesy door light make your car artistic moreover the atmosphere.
Easy installation. No need drill hole. Just stick the light lamp on the door panel and stick the magnet on the bottom of the car frame. No harm to car.

Click Here For More Information

October 9, 2018

WONFAST® For CHEVROLET Car Auto Laser Projector Logo Illuminated Emblem Under Door Step courtesy Light Lighting symbol sign badge LED Glow Performance

CHEVROLET Avalanche Aveo Aveo5 Astro Camaro Cavalier Colorado Cobalt C3500 Equinox Express 1500 Express 2500 Express 3500 HHR Impala Lumina Malibu S10 Agile Beat Blazer Caprice Captiva Captiva Sport Cassia Celta Chevy Cruze CMV Corvette Corsa Epica Esteem Evanda Exclusive Grand Blazer Lova Montana Monte Carlo Meriva Niva Onix Orlando Omega Prisma Sail Sonic SS SSR Spark Spin Suburban Silverado Tavera Tahoe Tornado Tracker Traverse TrailBlazer Trax Uplander Volt Venture

Product Features

CHEVROLET Avalanche Aveo Aveo5 Astro Camaro Cavalier Colorado Cobalt C3500 Equinox Express 1500 Express 2500 Express 3500 HHR Impala Lumina Malibu S10 Agile Beat Blazer Caprice Captiva Captiva Sport Cassia Celta Chevy Cruze CMV Corvette Corsa Epica Esteem Evanda Exclusive Grand Blazer Lova Montana Monte Carlo Meriva Niva Onix Orlando Omega Prisma Sail Sonic SS SSR Spark Spin Suburban Silverado Tavera Tahoe Tornado Tracker Traverse TrailBlazer Trax Uplander Volt Venture
These lihgts are just like welcome guards, when the owner is seating in car and close the door, the logo light disappear. How it works? This car laser logo light works as car courtesy light, when you open the door, the car logo will be projected on the ground. when the door is closed, the light will be off automatically. You will find this light is so cool when you open the door! you also can show it off among your partner or friends,
it will be given you more and more respect and applause. Features: 100% brand new Installed Simply, Good Looking and Utility High Brightness LED, Power Consumptions Savage Shell is made from Aluminum alloy of high temperature resistant, adopts high brightness CREE LED as lamp house Latest and improved design Voltage:12V DC Output power: 5W/ Pcs Material: Aluminum alloy Working Temperature: -40 Centigrades to +150 Centigrades. No pollution, no noise, no electronic interference,
2 LIGHTS FOR 2 DOORS SET car led door light for CHEVROLET led logo projector Ghost What is Car laser logo welcome light? With the technology developing, laser light has been installed into more and more vehicles. Laser car logo welcome light is a new part. It is manufactured by laser and optical high technology. The feature is very shine. If it is installed onto the car, the welcome light will be displayed on the ground after the door is opened, the owner are given more respect by the brand car.
waterproof and dustproof design. Durable and non-fading brilliant beams. Package Includes: SET OF 2 x 5W LED Car Led Ghost Shadow Light Car Logo Light Welcome Lights for CHEVROLET 1 x HSS Hole Saw !!!ATTENTION !!! AVOD LOW QUALITY REPLICAS.THIS IS CHAMPLED PRODUCT APPROVED TO SELL FROM FACTORY AMAZON STORE — Champled — ONLY. TO SEE OTHER CHAMPLED PRODUCTS INPUT — CHAMPLED — IN TO AMAZON PRODUCT SEARCH. WARRANTY 1 YEAR IF ORDER FROM Champled SELLER! 2 X 5W SET

Click Here For More Information

October 9, 2018

CHAMPLED® For CHEVROLET Laser Projector Logo Illuminated Emblem Under Door Step courtesy Light Lighting symbol sign badge LED Glow Car Auto Performance Tuning Accessory

FOR CHEVY CHEVROLET Avalanche Aveo Aveo5 Astro Camaro Cavalier Colorado Cobalt C3500 Equinox Express 1500 Express 2500 Express 3500 HHR Impala Lumina Malibu S10 Agile Beat Blazer Caprice Captiva Captiva Sport Cassia Celta Chevy Cruze CMV Corvette Corsa Epica Esteem Evanda Exclusive Grand Blazer Lova Montana Monte Carlo Meriva Niva Onix Orlando Omega Prisma Sail Sonic SS SSR Spark Spin Suburban Silverado Tavera Tahoe Tornado Tracker Traverse TrailBlazer Trax Uplander Volt Venture CHEVROLET CORVETTE C3 Stingray С2 Sting Ray C1 ZR1 LT1 ZL1 Z06 GM C2 Sting Ray coupe C7 Stingray Convertible ZR1 Hero Edition C6 C5 C4 coupe

Product Features

car led door light for CHEVROLET led logo projector Ghost What is Car laser logo welcome light? With the technology developing, laser light has been installed into more and more vehicles. Laser car logo welcome light is a new part. It is manufactured by laser and optical high technology. The feature is very shine. If it is installed onto the car, the welcome light will be displayed on the ground after the door is opened, the owner are given more respect by the brand car.
These lihgts are just like welcome guards, when the owner is seating in car and close the door, the logo light disappear. How it works? This car laser logo light works as car courtesy light, when you open the door, the car logo will be projected on the ground. when the door is closed, the light will be off automatically. You will find this light is so cool when you open the door! you also can show it off among your partner or friends,
it will be given you more and more respect and applause. Features: 100% brand new Installed Simply, Good Looking and Utility High Brightness LED, Power Consumptions Savage Shell is made from Aluminum alloy of high temperature resistant, adopts high brightness CREE LED as lamp house Latest and improved design
Voltage:12V DC Output power: 5W/ Pcs Material: Aluminum alloy Working Temperature: -40 Centigrades to +150 Centigrades. No pollution, no noise, no electronic interference, waterproof and dustproof design. Durable and non-fading brilliant beams. Package Includes: SET OF 2 x 5W LED Car Led Ghost Shadow Light Car Logo Light Welcome Lights for CHEVROLET 1 x HSS Hole Saw
!!!ATTENTION !!! AVOD LOW QUALITY REPLICAS.THIS IS CHAMPLED® PRODUCT APPROVED TO SELL FROM FACTORY AMAZON STORE — Champled — ONLY. TO SEE OTHER CHAMPLED® PRODUCTS INPUT — CHAMPLED® — IN TO AMAZON PRODUCT SEARCH. WARRANTY 1 YEAR IF ORDER FROM Champled SELLER ONLY! 2 X 5W SET

Click Here For More Information

July 27, 2018

LED Light Illuminated Door Sill Scuff Plate Cover for GM Chevy Chevrolet Camaro 2010 2011 2012 2013 2014 2015(blue light)

Why led light door plate cover can be a wonderful accessory for your Chevy Chevrolet Camaro?
You must not miss this led light door plate cover to make your Chevy Chevrolet Camaro be amazing cool!

High-strength stainless steel makes it have a long-lasting service time.
Made of high standard stainless steel with die-casting technology, it is durable and super strong will not chip or crack. Also, the high-end material is effective anti-rust and anti-deformation and ensures that the light in all kinds of extreme and harsh environment is also normal use.

A nice exterior accessory to protect your door plate from damage.
Effectively protect the door palte from crash, bump and other outer damage. Cool for travel and safe for travel.

More eye-catching, more secure and reliable!
This stylish Chevrolet Camaro accessory can serve as a safety device, to ensure safety of getting on and off at night.

Buy it with confidence!
Package included: 1 set of 2pcs led light door plate cover.

Product Features

HIGH QUALITY: Made of high quality stainless steel scuff plate door sill entry guard with silver finished and blue LED light.
GREAT DESIGN: Designed to prevent scratches and scuffs on the door sill scuff black plate.
UNIVERSAL: Greatly fits for Chevrolet Camaro 2010 2011 2012 2013 2014 2015.
EASY INSTALLATION: No any modification to the original car required. Attached with the 3M tape, it just takes few minutes for installation with great convenience. Please kindly note that using lighter or hairdryer to heat the 3M tape slightly, the installation effect will be more better.
100% SATISFACTION GUARANTEE:If you’re not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee. Premium Support & 3 Years’ Warranty.

Click Here For More Information

July 27, 2018